|
Permanent
Pool Coving is a way to seal the space between the pool wall
and the liner.
Pool
Coving is:
- Flexible
and Lightweight
- Extends
Pool Life
- Easy
To Install
- Prevents
Washout and Corrosion
- Protects
Liners
- Will
Not Move Like Sand
Coving is an
Integral part of every pool system, whether with sand, (not
recommended) Or our neutral poly foam permanent cove. Protect
yourself from liner blow out.
Permanent
Pool Coving is a 3 inch by 4 inch preformed foam strip and is safe
for use with all pool liners. Lightweight and easy to handle,
Permanent Pool Coving comes in 48 inch long sections that bend
easily without breaking and works with all pool brands. The
plastic backing strip locks each section of cove into the bottom
rail, allowing it to move as the pool wall expands and contracts.
Unlike sand or dirt, Permanent Pool Coving can not be washed out and
will not hold moisture against metal components. This feature
reduces corrosion and may add years of life to a pool and its
components. Because Permanent Pool Coving is made from a high
density foam, it will not change shape or indent, making pool
cleaning easier
It
Is recommended by the manufacturer to purchase Pool Cove and
Pool Pad
together
|
Installing
Over Straps
|
Pool
Pad Going Down in Strips
|
 |
Pool
Pad Installed Completely (Over Perma Cove)
|
|
|
Pool
Pad:
- Is
Easy To Install
- Extends
Liner Life
- Insulates
Pool to Prevent Heat Loss
- Keeps
a Smooth Bottom for Easier Cleaning
- High
Density Lowe Compression and stays in place
Pool Pad Will Protect your liner for years. Made from a
special high density polyethylene foam, our Pool Pad
acts as a barrier to keep water away from metal
components, reducing rust and corrosion. In addition, by adding a
layer of protection between your pool liner and the ground you had
puncture protection and heat retention.
Pool Pad is easy to install. First, roll out sections of pad and
cut them one foot longer than the (biggest if oval) dimension of the
pool. Next, seam enough 4 ft. wide sections together with tape to
cover the (smaller if oval) dimension of the pool. Trim off excess
pad material after pool has been filled.
|
