|
CHECK FOR
POOL DAMAGE AND WEAR
Periodically check your pool and
ladder components for damage and
wear. Be sure all screws are in
place. Replace all damaged or worn
components and tighten all screws
before you use the pool, deck or
ladders.
DO NOT
MODIFY POOL
Never modify the pool or
accessories, or remove or drill
holes in the pool, deck or ladder
components unless instructed.
SHARP EDGES
There is a possibility that a sharp
edge may have been formed on a metal
part during the manufacturing
process. Check all pool, filter,
ladder or deck parts for sharpness.
In the event that you find a sharp
edge on a metal part, please take
steps to remove it with sandpaper or
a file or return it for replacement.
REPLACEMENT
PARTS
Always use Original Equipment
Manufactured (OEM) parts for your
replacement requirements.
KEEP WATER
CLEAN
Always keep your pool water clean so
that the bottom is visible at all
times. Individuals must be able to
see that the water is too shallow
for diving, and must be able to see
small children in the pool!
INSTALL
POOL ABOVEGROUND
Never install your above ground
swimming pool below the ground
surface. This pool must be installed
on the ground surface only. There
should be a flat, three (3) foot
area (minimum) around the outside
perimeter of your pool. This is for
the continued enjoyment of your
pool.
|
